Hydrostatic ground drive belt, Idler pulley, Jackshaft – Walker MT User Manual
Page 72: Belt tightener arm, Spring, Transmission drive pulley, Hydrostatic ground drive belt assembly (engaged), Maintenance instructions
Maintenance Instructions
REPLACING/REPAIRING
68
Hydrostatic Ground Drive Belt
1.
To remove the hydrostatic ground drive belt:
a.
Raise the spring-loaded belt tightener arm
and idler pulley to relax belt.
b.
Slide belt off pulleys, then release the idler.
Hydrostatic
Ground Drive Belt
Idler Pulley
Belt Tightener Arm
Jackshaft
Transmission
Drive Pulley
Spring
Hydrostatic Ground Drive Belt Assembly (Disengaged)
2.
Reverse the procedure to install the hydrostatic
ground drive belt.
Belt Tightener Arm
Idler Pulley
Hydrostatic
Ground Drive Belt
Spring
Hydrostatic Ground Drive Belt Assembly (Engaged)