Special commands, Pause duration, Begin new rule – Wasp Bar Code WPS100 User Manual
Page 225: Special commands -7, Pause duration -7 begin new rule -7
9-7
Advanced Data Formatting
Special Commands
Pause Duration
This parameter allows a pause to be inserted in the data transmission. Pauses are set by
scanning a two-digit number (i.e., two bar codes), and are measured in 0.1 second
intervals. For example, scanning bar codes “0” and “1” inserts a 0.1 second pause; “5” and
“0” gives you a 5 second delay. Numeric bar codes begin on page
. If you make an error or wish to change your selection, scan Cancel bar code on
page
. The default for Pause Duration is 1 second.
Pause Duration
Begin New Rule
Scan this bar code to start entering a new rule.
Begin New Rule