Wilton FK350-4 - Manual (Page 6)

6
Introduction
The FK350 and FK350-SX are circular saws designed to provide a reliable solution to the needs of
machine shops and production environments that work with steel or iron. The FK350 is manually
operated: after clamping the material in the vise, the operator presses the trigger handle starting the
blade, and brings the operating lever downward to cut the material. The SX offers both semi-auto and
manual mode. When in semi-auto mode, operator positions material, and then presses the cycle-start
button. The saw control system activates the vise and clamps the material, and brings the head down
completing the cut. The head then is raised and the vise released, completing the cycle. An optional foot
switch is available to facilitate convenient cycle-start. The FK350 and FK350-SX can perform miter cuts
up to 45º to the right or left.
Specifications
Model...................................FK350-2 .....................FK350-4.................FK350-2SX................ FK350-4SX
Disc Blade
Disc diameter ..............14" (350mm) ..............14" (350mm).............. 14" (350mm) ............. 14" (350mm)
Hole diameter................1.3" (32mm) ...............1.3" (32mm)............... 1.3" (32mm) .............. 1.3" (32mm)
Blade thickness ............0.1" (2.5mm) ..............0.1" (2.5mm).............. 0.1" (2.5mm) ............. 0.1" (2.5mm)
Cutting Speed
Blade Speed (RPM) ................ 44/88 ......................... 44/88.......................... 44/88.......................... 44/88
Motor
Motor ................................. 2HP/3HP ................... 2HP/3HP.................... 2HP/3HP.................... 2HP/3HP
Voltage ................................ 220VAC ..................... 440VAC......................220VAC......................440VAC
Other
Coolant Capacity......................3 gal. ..........................3 gal........................... 3 gal........................... 3 gal.
Dimensions ....... 25"L x 43"W x 75"H ...25"L x 43"W x 75"H....28"L x 50"W x 60"H....28"L x 50"W x 60"H
Weight .................................... 720lbs ........................720lbs.........................800lbs........................ 800lbs
Cutting Capacity (All Models)
Degree Round Square Rectangle
90° 4.5" 4.25" 5.5" x 3.75"
Tubing
45° 3.5" 3.5" 3.5" x 3.5"
90° 2" 2" 2" x 2"
Solid
45° 1.75" 1.75" 1.75" x 1.75"
The specifications in this manual are given as general information and are not binding. WMH Tool Group
reserves the right to effect, at any time and without prior notice, changes or alterations to parts, fittings,
and accessory equipment deemed necessary for any reason whatsoever.