630-521-0 - pg3-1, Technical specifications – Windsor Compass 2 10070570 User Manual
Page 9

TECHNICAL SPECIFICATIONS
CMPS2 86305210 04/23/08
3-1
ITEM DIMENSION/CAPACITY
120V, 14A, 60HZ
Electrical
230V, 7A, 50HZ
Electric Pump Motor
1/2hp, 1750rpm
Solution Pump
700psi (48 bars), Axial plunger
Electric Vacuum Motor
2stage, 1.25hp (2.80m
3
/min.)
Waterlift
82 in. (208 cm)
Solution Capacity
29 gallons (111L)
Recovery Capacity
19 gallons (70L)
Wheels
-
Front (2)
-
Rear (2)
6 in. dia. (15.24cm) X 1.5
12 in. dia. ( 30.48cm)X 1.75
Dimensions – Weight
205 lb. (93kg)
Dimensions – Length
36 in. (91.4cm)
Dimensions - Height
43 in. (109.2cm)
Dimensions - Width
24.75 in. (62.87cm)
Power Cable
50 ft. (127m) 14 gauge
SPECIAL NOTES:
The sound pressure level at 1m from the machine was measured to be 79 dBA. This was a nearfield,
broadband measurement taken in a typical industrial environment on a tile floor. This appliance
contains no possible source of impact noise. The instantaneous sound pressure is below 63 Pa.
The weighted root mean square acceleration at the operator’s arms was measured to be below
2.5m/s
2
. This was a tri-axial, third-octave-band measurement made during normal operation on a
composite tile floor. The measurement and related calculations were made in accordance with
ISO 5349-1.