VIPowER SmartDup VP-8220 - Manual (Page 10)

8 SmartDup IDE CD Duplicator User’s Guide
Installing Drive, Cover and Rubber Stands
Top Cover
Bottom
Cover
Drive
Mounting
Screws (x4)
CD-ROM
Drive
Rubber
Stands (x4)
End-Panel
Assembly
Top Cover
Mounting
Screws (x4)
7. Replace the four rubber stands, one on each of the four corners. Orient each
stand so the raised nub is on the bottom. These help heat dissipation and provide
secure placement of the CD-ROM box enclosure.
8. Repeat the same steps to install the CD-R or CD-RW in the second CD-ROM
Box enclosure.
Assembled CD-ROM Box Enclosure