VIEWSONIC PJD6212 - Manual (Page 31)

EN-28
Appendix
LED Indicator Messages
LED Type Color Status Meaning
Power LED Blue Solid (LED x 1)
The projector is in standby
mode.
Lamp LED Off Off
Temp LED Off Off
Power LED Blue Solid (LED x 2)
Powering up Lamp LED Off Off
Temp LED Off Off
Power LED Blue Solid (LED x 2)
Normal operation Lamp LED Off Off
Temp LED Off Off
Power LED Blue Flash (LED x 2)
Power-down Lamp LED Off Off
Temp LED Off Off
Power LED Blue Solid (Full brightness)
The projector system has some
problems with its fans, so the
projector cannot start up.
Lamp LED Red Solid
Temp LED Red Flash
Power LED Blue Solid (Full brightness)
The lamp is in good condition
and is projecting at maximum
brightness.
Lamp LED Off Off
Temp LED Off Off
Power LED Blue Solid (Full brightness) The lamp has reached its end
of life and must be changed
soon. The lamp will continue to
operate until it fails . Change
the lamp. If the lamp is off, then
the ballast will become
malfunction.
Lamp LED Off Solid
Temp LED Off Solid
Power LED Blue Flash (Full
brightness)
The projector is shutting and
the fan motor is cooling the
lamp for shutdown. Do not
unplug the power cord or turn
the power off before the Lamp
LED changes to flashing. The
fan motor will turn off when the
lamp has cooled.
Lamp LED Red Solid
Temp LED Red Solid
Power LED Blue Solid (Full brightness) Temperature is too high. The
lamp will turn off. The fan motor
is cooling the lamp.
Lamp LED Red Flash
Temp LED Red Off
Power LED Off Off The lamp ignition failed. If
temperature is too high, the
fans will cool the lamp.
Lamp LED Red Solid
Temp LED Red Solid