VIEWSONIC VS13645 - Manual (Page 54)

ViewSonic Pro8500 50
projector. That password should be kept and used next when you try to
connect to the same projector.
„ If there are multiple computers connected to the projector, you can decide a
display zone by clicking 1, 2, 3, 4, L, R, All, or Background.
2. If you want to freeze the projected image on the screen, press . Any further
movements will be not been seen on the screen until is pressed.
3. You can choose a capture mode from here.
i. To display a full screen, click FullScreen.
ii. To display a partial screen, click FixedSize. A square appears on your
screen. You can place it where you want to project.
iii. If you wish to change the square, click Alterable.
4. The Basic Setting page allows you to configure vsPresenter.