VIEWSONIC VS13645 - Manual (Page 34)

ViewSonic Pro8500 30
Information
Factory Default
Lamp Hours
Lamp Hours Reset
Filter Hours*2
Filter Hours Reset*2
NetWork Wired LAN Status Disconnect, Connect
On, Off
DNS
Apply
Status
SSID
Connection Mode
Disconnect, Connect
Wireless LAN
Network Restart Yes, No
MAC Address
Input Source Computer 1, Computer 2,
Component, Composite, S-Video,
HDMI, USB A, USB B, LAN
Default Gateway
AP, Infrastructure
*1 Adjustable range and default setting vary depending on signal type.
*2 This function is only available when the projector is installed an optional filter cover.
*3 The selectable Function list includes Brightness, Contrast, Saturation, Color Setting >
Gamma, Overscan, Noise Reduction, Audio Setting, Microphone Volume, Speaker
Volume, Mute, Keystone, Aspect Ratio, Projection, Power Saving, ECO Mode, Filter
Mode, Menu Position, OSD Transparency, Closed Caption, Message, Zoom, DCR
and Test Pattern.
*4 Saturation is supported under Component, Video and S-Video modes.
*5 Sharpness is supported under HDMI, Component, Video and S-Video modes.
*6 Tint is supported under Component, Video and S-Video modes.