Tint, Pre l iminar y – Vidikron Vision 110 User Manual
Page 66
52
Vidikron Vision Model 110 Installation/Operation Manual
PRE
L
IMINAR
Y
Select Color and press ENTER or SELECT. While looking at the color bar pattern through a
blue filter, adjust the color saturation level until the outermost (gray and blue) color bars
appear to be a single shade of blue:
Tint: Tint or “hue” is essentially the ratio of red to green in the color portion of the image.
When tint is decreased, the image appears redder; when it is increased the image appears
greener. To set the tint, select Tint and press ENTER or SELECT. While looking at the color bar
pattern through a blue filter, adjust the tint level until the cyan and magenta color bars (on
either side of the green bar) appear to be a single shade of blue.
Like the brightness and contrast controls, the color and tint controls are
interactive. A change to one may require a subtle change to the other in
order to achieve the optimum setting.
gray
yellow
cyan
gr
een
magenta
re
d
blue
Note