Pre l iminar y – Vidikron Vision 110 User Manual
Page 25
Vidikron Vision Model 110 Installation/Operation Manual
11
PRE
L
IMINAR
Y
1.
LIGHT
Press to illuminate the buttons.
2.
ON / OFF
Use these buttons to turn the projector on or off.
3.
Source Selection Buttons:
VID
Press to select Composite video input as the source.
S-VID (S-Video)
Press to select the S-Video input as the source.
HDMI 1 (I) / HDMI 2 (II)
Press to select an HDMI input.
HD 1 / HD 2 / HD 3
Press to select the HD 1 (RCA), HD 2 (BNC) or HD 3 (PC) video input as the source.
4.
INFO
Press to display input signal and product information.
Cursor Keys (
,
,
,
)
Use these buttons to select items or settings, adjust settings or switch display patterns.
EXIT
Press to save menu item setting(s), exit the current menu and return to the previous one.
ENTER
Press to select a highlighted menu item or confirm a changed setting. This button
functions similarly to the SELECT button on the projector rear panel (Figure 2-2).
MENU
Press this button to show or hide the OSD controls.
5.
Picture Adjustment Buttons:
BRT (Brightness)
Press to adjust black level.
CONT (Contrast)
Press to adjust white level.
COL (Color)
Press to adjust color intensity.
TNT (Tint)
Press to adjust color hues.