Install lens motor, Figure 3-8 . autoscope lens motor installation, 8. autoscope lens motor installation – Vidikron Vision 110 User Manual

Page 40: Pre l iminar y

Text mode
Original mode

Vidikron Vision Model 110 Installation/Operation Manual

PRE

IMINAR

Install Lens Motor: Position the AutoScope Lens Motor (item #1) as shown in Figure 3-8.
Line up the mounting holes on the lens motor housing with those on the underside of the
projector. Secure the motor to the projector with the eight (8) remaining M6 x 12mm
Pan-Head Phillips screws (item #2).

Figure 3-8. AutoScope Lens Motor Installation

After you have installed the AutoScope lens motor, proceed with Mounting the Vision 110
(page 28).