Vidikron Vision 110 - Manual (Page 61)

Operation
Vidikron Vision Model 110 Installation/Operation Manual 47
PRE
L
IMINAR
Y
Main Menu The Main Menu is the starting point for accessing all projector functions.
(The Calibration and Service menus are hidden and not accessible until you enter a
passcode.)
Input Source From the Main Menu, select Input Source to choose a video signal source.
The active source is indicated by an arrow (>) to its left; in this example, Composite is the
active source.
Aspect Ratio To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio from
the Main Menu and press ENTER or SELECT. Select the appropriate aspect ratio for your
screen size and the type of program material being viewed; refer to Table 4-1.
The currently-selected aspect ratio is indicated by a “
7
” to its left; in this example, 16:9 is
selected.
Vision Model 110
Input Source
Aspect Ratio
Picture
Input Position
Memory Presets
Information
Calibration
Service
Input Source
> Composite
S-Video
Component RCA (HD1)
Component BNC (HD2)
Component PC (HD3)
RGB RCA (HD1)
RGB BNC (HD2)
RGB PC (HD3)
HDMI 1
HDMI 2
Aspect Ratio
7
16:9
4:3
Letterbox
IntelliWide
Cinema
IntelliWide 2.35
The aspect ratio selection is automatically saved for each input and
resolution.
Note