Viking AD128128M - Manual (Page 15)

AD6464M / AD128128M Rev. 5
Your GYDA-VX card(s) may be inserted in any of the two dedicated GYDA slots (A) and (B)
(see Figure 2).
Figure 12
3.5.1 Card insertion
The GYDA-VX card is inserted in the exact same way as the SysCon card. See chapter 3.4.1.
3.5.2 Card removal
The GYDA-VX card is removed in the exact same way as the SysCon card. See chapter 3.4.2.
3.5.3 Status LEDs and Reset button
The meaning of the Status LEDs, and the function of the Reset button on the GYDA-VX card
is exactly the same as on the SysCon card. See chapter 3.4.3.
3.5.4 CF-card and battery
The Compact Flash (CF) card and battery are both inserted and/or removed in the exact
same way as on the SysCon card. See chapter 3.4.4.
3.6 X-point module
Each VikinX Modular frame must be equipped with at least one X point card, in order to
work as a router.
A maximum of two X point cards can be inserted into the frame, providing router sizes of
either 64x64 stereo audio or 128x128 stereo audio. The X-point cards are inserted according
to the labelling on the rear side of the frame.
Figure 13
network-electronics.com | 15