Vidikron Vision 30 - Manual (Page 33)

33 Vidikron Vision Model 30 Owner’s Operating Manual
Vision Model 30
Picture Adjust
Image Option
Projector Status
Installation
Service
ISF Calibration
On-Screen Display Menus
Using the Menu
EXIT
L-BOX
I-WIDE CINEMA C-FILL
MEM1
ISF
NT
ISF
DAY
DEF
1 2 3
4 5 6
7 8 9
0
PIP PIP+
PIP-
ACTIVE
PBP VAC
LIGHT
MENU
ON OFF
COMP 1
COMP 2
S-VID VIDEO
RGB HD HDMI
ANA 4X3
This unit is equipped with an on-screen display
(OSD) menu for making adjustments and changing
settings. There are five menu languages; see
the Language setting under “Installation” on
page 40.
• Press MENU to turn on/off the OSD menu.
NOTE: If the Main Menu is displayed, you can also press EXIT to turn it off.
• Use the arrow buttons ( ▲,◄,▼,►) to select items in the menu or to make various
adjustments.
• Press ENTER to select an item to change, or press EXIT to return to the previous
menu.
When the MENU button is pressed, the Main Menu (shown below) appears on the screen.
Use the
▲ or ▼ button to move to an item, then press ENTER to select it. The menus are
described more fully in the following sections.
Main Menu
Picture Adjust: brightness, contrast, color
level, tint, sharpness, color temperature
and color select
Image Options: input selection, aspect
ratio, SD (480i) enhance, video filter, HD/
RGB adjust, blue enable, save/load saved
settings
Projector Status: load default settings (no
confirm), sleep timer, lamp power, lamp
hours
Installation: OSD language, image
orientation, keystone correction, OSD
position, OSD timer, PIP/PBP setup,
background color
Service: white balance, gamma selection,
ICC adjust, image over-scan, video black
level, image shift, amplitude, fan control,
lamp timer reset, RS-232 baud rate, change
IR remote code
ISF Calibration: picture adjust, white balance,
gamma selection, blue enable, save ISF
settings, splash screen timer, ISF splash
screen enable