Vision Fitness T9700 Series - Manual (Page 61)

57
GENERAL
TENSIONING THE BELT
If the running belt slips when used, use the supplied 8mm Allen wrench to
turn the left and right tension bolts clockwise
1 /
4
-turn at a time until the belt
no longer slips.
CENTERING THE BELT
Run the treadmill at 2.0 mph. If the running belt is too far to the right side,
use the supplied 8mm Allen wrench to turn the right tension bolt clockwise
1 /
4
-turn at a time until the belt remains centered during use.
If the running belt is too far to the left side, turn the left tension bolt
clockwise 1 /
4
-turn at a time until the belt remains centered during use.