Final installation, Anti-tip device installation, Final installation anti-tip device installation – Viking F20508 User Manual
Page 10: Cont.)
19
3/
8”
3/8”
(0.
95
cm
)
(0.95 cm)
3/
8”
(0.
95
cm
)
4
Check that unit is level side to side
and front to back. The side trim must be 3/8” (0.95 cm)
above countertop. If unit is not level repeat steps 5-7
of “Leveling/Adjustments/Alignment” section.
18
1
Note: Refer to range electrical
requirements section for proper
installation information.
1
2
4
Attach bracket with
mounting hardware provided.
Connect electrical in shaded area. See the “Electrical
Requirements” section for more information.
Final Installation
Anti-tip Device Installation
(cont.)
2
Install backguard.
3
Slide range into place. Be sure anti-tip
bracket slides into the anit-tip opening.