Using the on screen display (osd) – Vivitek 51" Micro Display Projection TV User Manual

Page 31

Using the On Screen Display (OSD)

Menu Operations

The OSD consists of a Main Menu of items and each of these items has a Sub Menu associated with it that the

OSD will switch to when the item is selected.

1. Press the MENU button on right side of the RPTV or remote control : The Main Menu will be displayed on the

screen, as shown below.

2. Press the ADJUST

(CH+) or ADJUST

(CH -) button on right side of the RPTV or the

button on the

remote control to highlight the feature you wish to select.

3. Press the ENTER button on right side of the RPTV or SEL button on the remote control to select the feature.

the Main Menu will now change to the Sub Menu of the feature selected.

4. Press the ADJUST

(CH+) or ADJUST

(CH -) button on right side of the RPTV or the

button on the

remote control will highlight the option you wish to adjust and press the ENTER button on right side of the RPTV
or SEL button on the remote control.

5. Adjust the level or change the setting of the selected option by pressing. ADJUST

(VOL+) or ADJUST

(VOL -) button on the right side of the RPTV or the

buttons on remote control.

6. Repeat steps 4 and 5 to adjust additional options.
7. Once the adjustment is complete, press the "EXIT" button to return to the main menu or press the "MENU"

button twice on right side of the RPTV or on the remote control MENU button to exit the OSD.

OSD Menus and Options

The OSD menus and options are used to adjust various settings on your RPTV.

PICTURE ADJUST (DYNAMIC) - TV / DTV Modes

Picture Adjust Menu

CONTRAST - Adjusts the contrast of the picture.
BRIGHTNESS - Adjusts the brightness of the picture. Users may need to

adjust the brightness after the RPTV warms up.

COLOR - Adjusts the color saturation making colors more intense.
TINT - Adjusts the color of flesh tones.
SHARPNESS - Adjust the amount of detail enhancement.
COLOR TEMP - Adjust the color temperature level.

(HIGH, LOW, MID LOW, MID HIGH)

This function can not be used in DTV mode.

NOISE REDUCTION - Turns noise reduction "on" and "off",

WIDE FORMAT - Adjusts the screen width to STRETCH, SIDE BAR,

S STRETCH, ZOOM, for viewing.

DEFAULT - Return to default value.

PICTURE ADJUST (PC) - PC Modes (RGB Input)

CONTRAST - Adjusts the contrast of the picture.
BRIGHTNESS - Adjusts the brightness of the picture. Users may need to

readjust the brightness after the PRTV warms up.

H POSITION - Adjust the horizontal screen position.

V POSITION - Adjust the vertical screen position.
AUTO SYNC. - Automatically adjust to the best setting.

ADC CLOCK - Removes any vertical distortion and clears or sharpens the

displayed characters.

ADC PHASE - Removes any horizontal distortion and clears or sharpens the

displayed characters.

COLOR TEMP. - Adjust the color temperature level.
DEFAULT - Return to default value.

PICTURE ADJUST (PC)

CONTRAST
BRIGHTNESS
H POSITION
V POSITION
AUTO SYNC.
ADC CLOCK
ADC PHASE
COLOR TEMP.
WIDE FORMAT
DEFAULT

SELECT

ENTER

BACK EXIT

35
35
65
65

65
65

HIGH
STRETCH

PICTURE ADJUST (DYNAMIC)

CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
COLOR TEMP
NOISE REDUCTION
WIDE FORMAT
DEFAULT

SELECT

ENTER

BACK EXIT

35
35

G15

35
35

HIGH

STRETCH