Menu functions, Getting started – Vivitek 51" Micro Display Projection TV User Manual

Page 30

Menu Functions

PICTURE ADJUST

You can adjust the settings of the PICTURE( CONTRAST, BRIGHTNESS, COLOR, TINT, SHARPNESS, COLOR
TEMP, NOISE REDUCTION, VIEW FORMAT.)

AUDIO ADJUST

You can adjust the AUDIO settings (TREBLE, BASS, BALANCE, EFFECT) for the internal SPEAKERS.

PIP SETUP

You can adjust the PICTURE IN PICTURE function.

SETUP

You can set LANGUAGE, SPEAKERS, CAPTION STYLE , DTV SETUP, HDMI and input source settings.

PARENTAL CONTROLS

PARENT CONTROL

ACCESS CODE : You must set the password (ACCESS CODE) when using parental control functions.

Note : This function allows you to restrict viewing of TV programs, to control TV usage based on FCC data

and to prevent your children from watching content that may be deemed harmful.

SPECIAL FEATURE

SYSTEM INFO.

You can adjust the OSD position of horizontal and vertical and setup Sleep timer.

Displays current system information.

MODEL NUMBER, MAIN INPUT, WIDE FORMAT, PIP INPUT, LAMP TIME and SOFTWARE VERSION.

Getting Started

Turning your RPTV "on"

1. Plug the power cord into an AC wall socket. The POWER LED on the front

panel will light red.

2. Press the POWER button on the side panel "on" the RPTV or the POWER

button on the Remote Control to power.
The READY LED will start flashing while the lamp turned on. Once the
lamp is warm enough the indicator will stay lit green and the picture will
begin to display on the Screen.

3. When the RPTV is "on", press the POWER button on the side panel or the

POWER button on the Remote Control. A message will display on the
screen warning you that you will power "off" the RPTV. Once the RPTV has
been turned "off" you cannot turn it "on" again until at least 30 seconds
later as a protection feature for the lamp. The lamp could be damaged if it
is turned "on" too soon after being "off", The READY LED will start flashing

turn off and the will be in the standby mode.

MAIN MENU

AUDIO ADJUST
PIP SETUP
SETUP
PARENTAL CONTROLS
SPECIAL FEATURES
SYSTEM INFO.

SELECT

ENTER

BACK EXIT

PICTURE ADJUST

until the protection time has passed and then the READY LED will