VIEWSONIC PJD5123 - Manual (Page 18)

Connection
When connecting a signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly inserted.
Important
„ In the connections shown above, some cables may not be included with the
projector (see “Package Contents” on page 6 ). They are commercially
available from electronics stores.
„ The connection illustrations above are for reference only. The rear
connecting jacks available on the projector vary with each projector model.
„ For detailed connection methods, see pages 16-19 .
Audio cable VGA cable (D-Sub to D-Sub)
Composite Video cable USB cable
S-Video cable VGA to DVI-A cable
VGA (D-Sub) to HDTV (RCA) cable
2 3
4
1 5 6 5 7
1 1
1 5
2 6
3 7
4
15