VTech MI6895 - Manual (Page 37)

www.vtechphones.com 37
B
as
ic
o
pe
ra
tio
n
Answering system operation
Record a memo
Press REC/MEMO
2 The system will announce “Record after the tone. Press STOP
when you are done.”
3 Speak toward the MIC to record a memo for up to four minutes
4 The timer shows the elapsed time (in seconds) in the message
window when you are recording
5. When finished recording, press PLAY/STOP / to save the
memo. The system announces “Recorded” to confirm.
Play back a memo
See Message playback (page 35) about retrieving memos
Call screening
If you wish to listen to caller’s leaving their message before choosing
to answer a call:
Set the playback
VOL on the base to a level greater than one by
pressing or to adjust the message playback volume
2 If you decide to answer a call while the caller is leaving a message,
simply press TALK/FLASH on the handset The answering system
will stop recording
Remote access
To retrieve new messages from any touch tone phone from a remote
location, a two digit access code is required The remote access code
can be any two digit number between 0 and 99 The remote access
code has been set to 19 at the factory but it can be changed it to any
two digit number any time for your convenience
• Memos less than
one second will
not be recorded
You can record a
memo up to four
minutes long