VTech mi6885 - Manual (Page 9)

www.vtechphones.com 9
G
ett
in
g s
ta
rte
d
G
ett
in
g s
ta
rte
d
• If the phone will
not be used for
a long period of
time, remove the
battery to prevent
possible leakage.
• If you have any
trouble installing
your phone,
please refer to the
Troubleshooting
section near
the end of this
manual.
Installation
Check battery indicator
If you see WARNING CHECK BATTERY! on the handset display, it indicates one of the following:
1. There is no battery in your handset. You need to install the supplied battery into your handset (see
Install handset battery)
. The battery needs to be replaced.
3. The battery has been installed incorrectly. Please reinstall (see
Install handset battery) and/or
see the diagram in the battery compartment of the handset.
When in
LOW BATTERY mode, the keypad sounds, backlighting and speakerphone features do not
work. When the battery has been charged, these features will return to their normal function.
Check for dial tone
After the battery is charged, press on the handset. You should hear a dial tone. If not, see
Troubleshooting.