De-register all handsets, Registration, Gett in g s ta rte d – VTech mi6885 User Manual
Page 13
www.vtechphones.com
13
G
ett
in
g s
ta
rte
d
Registration
After a while the handset will emit series of tones, the newly registered handset will be assigned the
lowest extension number not previously assigned to another system handset (1-4) when successfully
registered. Repeat steps 1 and if handset does not successfully register to the telephone base
within two minutes.
If you are replacing a handset on a system that has the maximum number of registered handsets or
wish to change the assigned handset number of your registered handsets, you must first de-register
the handsets, then re-register all handsets.
De-register all handsets
1. Press and hold
FIND HANDSET on the main telephone base for 10 seconds.
. When the
IN USE light starts to flash, release the FIND HANDSET button.
3. Press and release
FIND HANDSET again. The IN USE light will turn off and in a few seconds,
all handsets will be de-registered.
4. All handsets will show
NOT REGISTERED.
NOT REGISTERED
• If the de-register
process does not
work you may
need to reset
the system and
try again. To
reset: pick up
the handset and
press
.
Press the
OFF
button and place
the handset back
into the telephone
base.