VTech mi6885 - Manual (Page 21)

www.vtechphones.com 1
B
as
ic
o
pe
ra
tio
n
Handset operation
• To end the call, press INT or OFF on either handset, or place the
handset back in its telephone base.
If the called handset is out of range or on an external call, when paged,
the display of the calling handset will show:
Call forward
An external call can be forwarded or transferred from one
handset to another.
• If you are on an external call (HS1), you can forward the call to
another handset (HS) by pressing and holding INT. HS1 will show
FORWARD TO and you should input the number of the desired
handset.
• HS will show INCOMING CALL and start ringing
• Press on the HS to answer.
If the forwarded call is not answered within 30 seconds, the external
call will be returned to HS1 and the display will show CALL BACK,
and ring for 30 seconds. If the returned call is not answered within 30
seconds, the external call will end automatically.
CALL BACK
INTERCOM ENDED
UNABLE TO CALL
TRY AGAIN
FORWARD TO:
Call transfer
• While on an external call, a handset (HS1) can transfer the call to another system handset (HS)
by pressing INT. The external call is put on hold automatically.
• Select the destination handset number (1-4).
• HS1 shows CALLING HANDSET 2 (HS).
• HS can pick up the transferred call when it rings and the screen shows HANDSET 1 IS
CALLING.