VTech mi6885 - Manual (Page 8)

www.vtechphones.com 8
• If the battery has
not been charged,
place the handset
in the telephone
base, and allow
it to charge for at
least 16 hours.
• Use only the
VTech power
supply provided
with your
telephone.
To obtain a
replacement,
visit our website
at www.
vtechphones.com
or call 1 (800)
595-9511.
• This power unit
is intended to
be correctly
orientated in a
vertical or floor
mount position.
The prongs are
not designed
to hold the plug
in place if it is
plugged into a
ceiling, under-the-
table or cabinet
outlet.
Connect power to telephone base/handset chargers
1. Plug the power adapter into an electrical outlet not controlled by a wall switch, and the
connector into the power jack on bottom of the t elephone base .
AC power outlet Telephone outlet
Installation
. Choose the location for your charger, and plug its power supply into an electrical outlet.
Connect to phone line
Plug one end of the telephone line cord into the telephone line jack at the bottom of the telephone
base. Then plug the other end of the cord into the wall telephone outlet.
AC power outlet
G
ett
in
g s
ta
rte
d