VTech mi6885 - Manual (Page 12)

www.vtechphones.com 1
NOT REGISTERED
Registration
PRESS FIND HNDST
4 SEC ON BASE
Register a handset
When first purchased, all accessory handsets show NOT REGISTERED
on the screen. To register a handset:
1. Place the handset in a telephone base or charger that is connected
to a power outlet. If PRESS FIND HNDST 4 SEC ON BASE does not
appear on the screen after a few seconds, lift up handset and place
in base or charger again.
Four
seconds later:
. On the telephone base:
• Press and hold FIND HANDSET for four seconds.
• Release FIND HANDSET once the IN USE light comes on.
The mi6889 comes with four registered handset (named Handset 1, 2, 3, 4).
Additional handsets ( mi6807) are available from your local authorized dealers or from our website
at www.vtechphones.com in the US, or www.vtechcanada.com in Canada.
Up to four extension handsets can be registered with the same telephone base, and two can be in
operation at the same time. Each additional handset purchased will have to be registered separately
following the instruction which comes with the optional handset.
• When first
purchased you
need to charge
your handsets
for at least five
minutes before
registering to
telephone base.
• The handset
number is used
as the extension
number.
• If the registration
is not successful
lift all handsets
out of the
telephone base
or charger and
place them
back in the
telephone base
or charger. Try
the registration
process again.