Setting the presentation timer – VIEWSONIC PJD7383 User Manual
Page 42
Operation
38
Setting the presentation timer
Presentation timer can indicate the presentation time on the screen to help you achieve
better time management when giving presentations. Follow these steps to utilize this
function:
1.
Press Timer on the remote control to access the Presentation
Timer menu, or go to the SYSTEM SETUP: Advanced >
Presentation Timer menu and press MODE/ENTER on the
projector or ENTER on the remote control to display the
Presentation Timer page.
2.
Highlight Timer Period and decide the time period by pressing
/
. The length of time can be set from 1 to 5 minutes in 1-
minute increments and 5 to 240 minutes in 5-minute increments.
If the timer is already on, the timer will restart whenever the Timer Period is reset.
3.
Press to highlight Timer Display and choose if you want the timer to show up on
the screen by press
ing
/
.
4.
Press
to
highlight
Timer Position and set the timer position by pressing
/
.
5.
Press to highlight Timer Counting Direction and select your desired counting
direction by pressing
/
.
6.
Press
to
highlight
Sound Reminder and decide if you want to activate sound
reminder by pressing
/ . If you select On, a double beep sound will be heard at
the last 30 seconds of counting down/up, and a triple beep sound will be produced
when the timer is up.
7.
To activate the presentation timer, press and press
/
to highlight On and press
MODE/ENTER on the projector or ENTER on the remote control.
8.
A confirmation message displays. Highlight Yes and press MODE/ENTER on the
projector or ENTER on the remote control to confirm. You will see the message
“Timer is On” displaying on the screen. The timer starts counting when the timer is
on.
Selection
Description
Always
Displays the timer on screen throughout the presentation
time.
1 min/2 min/3 min Displays the timer on screen in the last 1/2/3 minute(s).
Never
Hides the timer throughout the presentation time.
Top-Left
Bottom-Left
Top-Right
Bottom-Right
Selection
Description
Count Up
Increases from 0 to the preset time.
Count Down
Decreases from the preset time to 0.