Group-level settings, Entering/editing the group name, Setting the group quick key – Uniden BC246T User Manual
Page 70
70
Programming/Editing Optional Settings
Group-Level Settings
The settings in this section apply to all of the channels
stored in the current group.
Entering/Editing the Group Name
Program SysteMS
E
Select the system
E
Select the group
E
Edit Name
E
Follow these steps to enter/edit the group name.
1. Rotate the scroll control to select the first letter.
2. Press
then rotate the scroll control once to
select the next letter.
3. Repeat Steps 1 and 2 until you have entered the
system name. Then press E
or press down on the
scroll control to accept the setting.
Hints:
• Each system name can be up to 16 characters.
Abbreviate as necessary to fit.
• The group name and system name alternate in the
top line of the display when the scanner stops on a
channel.
• Press twice to delete the current character.
• Press three times to clear the entire alpha tag.
Setting the Group Quick Key
Program SysteMS
E
Select the system
E
Edit Group
E
Select the group
E
Set Quick Key
E
Menu
Func
Menu