Setting system attenuation (trunked systems only) – Uniden BC246T User Manual
Page 68
68
Programming/Editing Optional Settings
• The scanner defaults to AFS (agency, fleet, subfleet)
format - the format used in most EDACS systems.
• See “EDACS Trunking” on Page 24 for more
information about the AFS format.
Setting Control-Channel Only
(Motorola Systems Only)
Program SysteMS
E
Select the system
E
Edit Sys Option
E
Set C
-CH Only
E
This setting determines the frequencies you need to enter
for Motorola systems. Select your setting, then press E.
Off
- you must enter all voice and control channel
frequencies.
On
- you only need to enter control channel frequencies.
Note: The scanner defaults to Off.
Setting System Attenuation
(Trunked Systems Only)
Program SysteMS
E
Select the system
E
Set ATTENUATION
E
This setting controls whether the attenuator will be on or
off for the current system. Select your setting then press E.
Off
- the attenuator is off.
On
- system frequencies are attenuated by about 18dB.
Notes:
• Turn on this setting if you are near other strong signal
sources. Attenuation sometimes helps to reduce
Menu
Menu