Uniden BC246T - Manual (Page 58)

58
Programming Radio Systems
Programming LTR Systems
Program SysteMS E
New System E LT
E Confirm? E
When the scanner prompts Confirm?, press E to accept
the settings. The scanner creates an empty LTR system,
with a default name of System nnN L.
nNn
increments as you add new systems. L indicates that
this is an LTR system.
Next, refer to the appropriate section to set system-wide
options. For most settings, you can accept the default.
However, for the items in bold, you must enter informa-
tion in order for your scanner to scan the system.
• See “Editing the System Name” on Page 61
• See “Editing the System Quick Key” on Page 62
• See “Editing the System Quick Key” on Page 62
• See “Setting the System Hold Time” on Page 63
• See “Setting the Channel Delay Time” on Page 63
• See “Setting ID Scan/Search (Trunked Systems
Only)” on Page 64
• See “Reviewing Locked Out Frequencies” on
Page 86
• See “Setting Channel Attenuation (Conventional
Channels Only)” on Page 75
• See “Deleting Systems” on Page 69
• See “Copying/Pasting Systems” on Page 69
• See “Setting System Frequencies” on Page 58
• See “Entering/Editing LTR Channel Groups” on
Page 59
Setting System Frequencies
SET FREQUENCIES E
New FREQUENCY E
Menu