Uniden ANA9320 - Manual (Page 33)

Feature Buttons
Note: The exact operation of the Feature Buttons depends on how
your PBX system is configured. Contact your PBX Administrator
for more information.
: Placing a call “on hold”
Press
hold. You will see the
following display:
To resume the call, press L1, L2
or TALK.
: Transferring a Call
The
xfer key must be programmed
before use.
Refer to “Programming Xfer in PBX”
section on page 25.
Press xfer (TRANSFER). You will
see the following display:
Dial the target number.
When the receiving party answers,
press
xfer to complete the transfer.
Note: The transfer feature is not available in PSTN mode.
: Connecting a Conference Call
To connect a second party to a call
in progress, press
conf
(CONFERENCE). You will see the
following display:
Dial the second party’s number.
When the other party answers,
press
conf to have a three-way
conversation.
Note: In PBX mode, multiline conferencing is available according to
the configuration of the PBX system.
27
35
Y:...ANA9320 om.vp
Tue Dec 03 15:25:12 2002
Color profile: Disabled
Composite Default screen