Uniden ANA9320 - Manual (Page 17)

Wall Installation
Standard Wall Plate Mounting
These Phones are designed to be mounted on a standard wall plate.
To attach the wall mount stand to the Base Unit:
1. Slide the Wall Mount stand into
the notches at the top of the Base
Unit, push the Wall Mount stand
down and snap it into place.
2. Plug the AC Adapter into the Base Unit
as previously described.
3. Place the AC Adapter cord inside
the molded channel of the Wall
Mount stand.
4. Plug one end of the short telephone cord into the LINE jack on
the Base Unit. Optionally, plug one end of a standard 2500 type
desk phone into the PHONE jack. Then place the telephone
cord(s) inside the molded channel(s) on the bottom of the Wall
Mount stand.
5. Plug the other end of the short telephone cord into the modular
wall jack.
11
19
Y:...ANA9320 om.vp
Tue Dec 03 15:22:37 2002
Color profile: Disabled
Composite Default screen