Uniden ANA9320 - Manual (Page 28)

Using the Handset
When you pick up the Handset and
press
TALK, you will see:
After the connection has been
made between the Handset and
Base, the display will show the
lines currently connected:
Or, you may see one of the following:
Condition Indicator LCD Screen
No Connection to Base
Unit Error Tone
Channel busy Error tone No display indication
Line in use L1 or L2
Indicator
blinks. L1 line in use
or
L2 line in use
If the Handset is at the range limit
of the ANA 9320, or no power is
going to the Base Unit,
you may see:
Take the following action:
During a Call In Standby Mode
Condition
Sound is Muted. Can’t make or answer calls
(Phone may ring
intermittently).
Action
Move back in range within
20 seconds or check
power to the base. Move back within range or
check power to the base.
22
30
Y:...ANA9320 om.vp
Tue Dec 03 15:24:14 2002
Color profile: Disabled
Composite Default screen