Uniden ANA9320 - Manual (Page 31)

Programming Xfer in PBX
Note: Before programming these commands, contact your
PBX Administrator to obtain programming codes.
The xfer key can be programmed for special use, such as causing
a "Hook Flash" followed by a special number or function.
The Hook Flash is used to send a signal to the PBX system to
initiate a transfer.
For example - to program xfer for "Hook Flash" and 9 for outside
transfers only:
Press and hold pause for two seconds.
The talk icon blinks.
Press flash.
Press 9.
Press xfer.
Press xfer.
For the ANA 9320, the transfer key is operated by the Hook-Flash
function. Program your system transfer code with the assistance of
the PBX System Administrator.
25
33
Y:...UC790B_2(ANA9320) OM.vp
Tue Dec 03 18:41:06 2002
Color profile: Disabled
Composite Default screen