Uniden DCT756 - Manual (Page 48)

48
To.reset.the.handset,.do.the.following:.
Press.and.hold. [ ].and.[#/>].for.at.least.5.seconds.until.the.SYSTEM.RESET.menu.appears...
Select.DEREGISTER.HS.submenu..WHICH.HANDSET?.appears.
Move.the.cursor.to.select.the.handset.ID.to.be.deregistered.from.the.list,.and.then.press.
..
DEREGISTER.HS.appears.
The phone will ask you to confirm the deregistration. Move the cursor to YES, and then press
..
You will hear a confirmation tone. the handset will delete its own base information without trying to contact the
base..When.the.base.information.is.deleted,.the.handset.displays.MODELS.VARY!.CHARGE.HANDSET.ON.
THE.BASE.FOR.REGISTRATION.OR.REFER.TO.OWNER’S.MANUAL.
If.the.handset.cannot.contact.the.base,.it.displays.UNAVAILABLE..Make.sure.the.handset.is.in.range.of.the.base.
and.the.base.is.connected.to.power.
Note:.It.is.also.possible.to.reset.the.handset.back.to.its.original.factory.settings..All.changes.including.phone-
book.entries.and.Caller.ID.information.will.be.erased..For.more.information.on.resetting.the.handset.back.to.
factory.settings.and.when.you.need.to.do.this,.see.www.uniden.com.or.call.our.Customer.Service.Hotline.(For.
contact.information,.see.the.back.page).
Resetting the Handset without the Base
If.your.original.base.is.not.available.for.some.reason.(for.example,.it.is.
lost.or.somehow.incapacitated),.you.can.still.reset.the.handset.and.use.it.
with.another.base..
Press.and.hold. [ ] and.[#/>] for.at.least.5.seconds.until.the.
SYSTEM.RESET.menu.appears..
Move.the.cursor.to.select.the.REPLACING.BASE.submenu,.and.
then.press ..REPLACE.BASE.appears.
Move.the.cursor.to.select.YES,.and.then.press. . A confirmation tone sounds. The handset de-
letes.its.own.base.information.without.trying.to.contact.the.base..When.the.base.information.is.deleted,.the.
handset.displays.MODELS.VARY! CHARGE.HANDSET.ON.THE.BASE.REGISTRATION.OR.REFER.TO.
OWNER’S.MANUAL. To.register.the.handset.to.the.new.base,.see.page.4.
1.
.
3.
1.
.
3.