Uniden DCT756 - Manual (Page 18)

18
Installing the Belt Clip
Line.up.the.holes.on.each.side.of.the.handset..To.
attach.the.belt.clip,.insert.into.the.holes.on.each.
side.of.the.handset..Press.down.until.it.clicks..
To.remove.the.belt.clip ,.pull.either.side.of.the.belt.
clip.to.release.the.tabs.from.the.holes.
Connecting to the Phone Line
Once.the.handset.battery.pack.is.fully.charged,.
connect.the.telephone.line.cord.to.the. TEL LINE.
jack.and.to.a.standard.telephone.wall.outlet..
Testing the Connection
To.test.your.connection.try.making.a.call..If.your.
call connects, the settings are fine. If your call
does.not.connect.check.the.following:
Check.the.AC.adapter.cord..Make.sure.it.is.
securely.connected.to.the.DC.IN.9V.con-
nector.and.to.a.standard.AC.power.outlet.
Check.to.make.sure.the.battery.is.fully.charged..(If.you.don’t.see.the.
“battery.full”.icon,.check.to.make.sure.the.battery.is.properly.connected).
Change.“dial.mode”.(instructions.follow).
1.
.
1.
.
3.
DCT756.Base.Shown DCT756.Base.Shown