Uniden DECT1480 User Manual

Page 21

If…

Try…

The system won't
record messages.

Making sure the Record Time is not set to

Announce Only.
Deleting messages (memory may be full).

A handset can't access
the answering system.

Seeing if another handset is using the system.
Making sure the phone is in standby.

My outgoing message
is gone.

If there was a power failure, you may

have to re-record your personal outgoing

message.

I can’t hear the base
speaker.

Making sure call screening is turned on.
Changing the base speaker volume.

Messages are
incomplete.

The incoming messages may be too long.

Remind callers to leave a brief message.
Deleting messages (memory may be full).

When I answer on an
extension, the phone
keeps ringing (or
keeps recording.)

You may have to change the line mode.

Contact Customer Service for instructions

Weak or Hard To Hear Audio

If a caller’s voice sounds weak or

soft, the signal might be blocked

by large metal objects or walls;

you might also be too far from

the base, or the handset’s battery

may be weak.

Try moving around while

you’re on a call or moving

closer to the base to see if the

sound gets louder.

Make sure the handset’s

battery is fully charged.

Try adjusting the earpiece

volume.



Do you use a T-Coil hearing aid?

If you have a hearing aid equipped

with a telecoil (T-coil) feature, the

interaction between the hearing aid

& digital cordless phones can cause

noise in the handset. If you have a T-

coil hearing aid & you have problems

with noise on the line, try turning on

T-coil mode. Open the menu. Select

Handset Setup, then select T-coil.

Using T-coil mode can shorten the

handset’s talk time; make sure to

watch the battery status and keep

the battery charged.

•