Uniden DECT1480 - Manual (Page 19)

1
To... From the base From a handset
answer the call NA Press Talk/Flash .
mute the call screen
without answering*
Press play/sTop .
Press End or return the
handset to the cradle.
* If you mute the call screen, the system continues taking the message: it just
stops playing through the speaker.
Using the System while You're Away from Home
You can also use your answering system from any touch-tone phone.
Before you can use this feature, you must program a security code.
Programming a security code
With the phone in standby, open the menu from any handset.
Select Ans. Setup, then select Security Code.
Use the number keypad to enter a two-digit security code (01 to
99). Press mEnU/sElECT when you’re finished.
Remember to make a note of your new security code!
Dialing In to Your System
Call your telephone number and wait for the system to answer.
(If your answering system is off, it will answer after ten rings and
sound a series of beeps instead of your greeting.)
During the greeting or beeps, press
0 and immediately enter your
security code. If you enter it incorrectly times, the system hangs
up and returns to standby.
The system announces the current time, the number of messages
stored in memory, and a help prompt. It will beep intermittently to
let you know it's waiting for your command.
When you
hear beeping,
enter a 2-digit
command from
this chart:
1.
2.
.

1.
2.
.
4.
01 Repeat message
02 Play message
03 Skip message
04 Delete message 05 Stop playback
06 Turn the system on
09 Turn the system off
10 Hear help prompts 01 Repeat message
02 Play message
03 Skip message
04 Delete message 05 Stop playback
06 Turn the system on
09 Turn the system off
10 Hear help prompts