Uniden DECT1480 - Manual (Page 15)

1
Call Transfer
To... Follow these steps:
transfer a call
Press ClEaR/inTERCom to put the call on hold.
Select the handset you want to page (select All to
page all handsets at the same time).
When another handset accepts the call, you'll be
disconnected (press Talk/Flash to rejoin the call).
1.
2.
3.
cancel a transfer Press Talk/Flash to return to the call.
accept a
transferred call
To answer the page and speak to the transferring
handset using the intercom, press ClEaR/inTERCom.
To speak to the outside caller, press Talk/Flash .
1.
2.
Voice Message Notification
If you subscribe to a voice mail service, your phone can notify
you when you have a new message waiting. This feature supports
Frequency-Shift Keying (FSK) message notification. Contact your
voice mail provider for information.
When you have new messages, the voice message icon appears in
the display, and the
STATuS
light on the handset blinks.
After you listen to your messages, the voice message icon turns off.
If it doesn’t, you can reset it: With the phone in standby, open the
menu and select Global Setup; select VMWI Reset, then select Yes.
USING THE ANSwERING SYSTEM
Answering System Options (Ans. Setup)
You can set or change the answering system options from any handset.
Just open the menu and select Ans. Setup. Select one of the following:
Security Code
Enter a 2-digit PIN so you can access your answering
system from any touch-tone phone (see page 19).
Ring Time
Set the number of rings (2, 4, or 6) before the answering
system answers the phone. Choose Toll Saver to
have the system pick up after 2 rings if you have new
messages or after 4 rings if you don't.


