Uniden DSS3455+1 - Manual (Page 38)

[37]
Conferencing
Transferring a Call
If you have more than one handset, up to four people can
participate in a conference call. A three-way conference call
consists of an outside line and two stations. A four-way
conference call consists of an outside line, the base speaker
phone, and two handsets. You can easily join a call already in
progress.
From the handset, press or to join the call. From the
base, press . You can hang up normally; the other
station will still be connected to the call.
You can transfer a call from one station to another.
[ / flash] [ ]
[speaker]
From the base
1. During a call, press
( on the dual-keypad base).
2. The call will automatically be placed on hold, and
a paging tone sounds on all stations. (On the
dual-keypad base, you need to select the handset
you want to talk with by pressing through ,
or press to page all registered
handsets.) To cancel the transfer, press
or ( ).
3. When another station accepts the transferred
call, you will be disconnected. If you want to
rejoin the call, press again.
1. During a call, press .
2. Use or to select the station you want
to transfer the call to, then press .
The call will automatically be placed on hold, and
a paging tone sounds. To cancel the transfer,
press or .
3. When another station accepts the transferred
call, you will be disconnected. If you want to
rejoin the call, press ] again or .
[int'com]
[hold/int'com/xfer]
[1] [4]
[*/tone]
[speaker] [int'com] [hold/int'com/xfer]
[speaker]
[xfer/intercom]
[ ] [ ]
[select/ ]
[ / flash] [ ]
[ / flash [ ]
From the handset