Uniden DSS3455+1 User Manual
Page 37
Using the Clarity Boost Feature
Finding a Lost Handset
Using Hold, Conference and Transfer
If you encounter interference while using your handset, you can manually improve the sound by setting the clarity
booster to on. This works only when the handset is in use, so while you are on a call:
1. Press
.
2. Move the cursor to CLARITY BOOST, and then press
. BOOST ON and B appear in the display.
Use the same procedure to turn off clarity booster. BOOST OFF appears.
To locate a misplaced handset, press
on the base (or
on the dual-keypad base) when the
phone is in standby. All registered handsets will beep for 60 seconds, and PAGING appears on the handset display.
To cancel paging, press
(
) again or any key on the found handset.
To place a caller on hold, press
on the handset,
on the base, or
on the
dual-keypad base. If you leave a caller on hold for more than ten seconds, the display will read, LINE ON HOLD.
To return to the party on hold, press
or
on a handset or
on the base.
[menu/clear]
[select/
]
[find hs]
[mute/find hs]
[find hs] [mute/find hs]
[xfer/intercom]
[hold]
[hold/int'com/xfer]
[ / flash]
[ ]
[speaker]
Note: You can only place a caller on hold for 5 minutes. Once 5 minutes have passed, the
caller will be disconnected and the phone will return to standby.
While a call is on hold, Caller ID and Call Waiting can not be received.
Placing a Call on Hold
[36]