Uniden DSS3455+1 - Manual (Page 16)

[15]
Connecting the Base and Charging the Handset
Connecting to the Phone Line
High Speed Internet
Testing the Connection
1. Connect the AC adapter to the DC IN 9V jack.
2. Connect the AC adapter to a standard 240V AC wall
outlet.
3. Place the handset in the base with the LCD screen
facing forward.
4. Make sure that the charge LED illuminates. If the LED
does not illuminate, check to see that the AC adapter is
plugged in and the handset makes good contact with the
charging contacts.
5. Charge your handset at least 15 to 20 hours before
plugging into the phone line.
Once the battery pack is fully charged, connect the telephone cord to the
TEL LINE jack and to a telephone jack.
If your phone line also has High Speed Internet please ensure you are
using an approved line filter before connecting the telephone cord.
Try making a call. If your call does not connect or you
cannot get a dial tone, try the following steps:
1. Make sure the AC adapter cord is securely connected
to the DC IN 9V jack and a standard power outlet.
CAUTION: To avoid risk of fire and shock, only
use the Uniden AAD-041S AC adapter.