Uniden DECT4096 Series - Manual (Page 7)

Place the cover over the battery
compartment and slide it up into place.
Connect the charger
Connect a charger AC adapter to each
charger's
AC IN 8V
jack and set the
plug into the notch as shown. (These
adapters might already be
connected.)
Plug the other end of the adapter into
a standard 120V AC power outlet.
Place each handset in a charger with
the display facing forward. The
CHArGE
light should turn on.
If... Try...
the
CHArGE
light doesn't
turn on
reseating the handset.
checking the AC adapter connection.
seeing if the outlet is controlled by a wall
switch.
-
-
-
Charge all handsets completely (about 15 hours)
before using them.
Test the connection
Pick up each handset and press TaLk . You should hear a dial tone,
and the display should say Talk. (Press eND to hang up.)
If you can't get a dial tone or the handset display says Unavailable, try
moving the handset closer to the base or resetting it (see page 44).
4.
1.
2.
3.
AC IN 8V AC IN 8V