Uniden DECT4096 Series - Manual (Page 27)

Using the Phonebook
Each station can store up to 100 entries in its phonebook, and each
entry can have two different phone numbers.
Open the
phonebook
Press PHoNEBooK/lEFT.
Scroll through the
entries
Press DoWN to scroll through the phonebook from A
to Z or UP to scroll from Z to A.
Jump to entries that
start with a certain
letter
Press the number key corresponding to the letter you
want to jump to.
Quick dial the
primary number for
an entry
Find the entry you want to dial.
To dial with the primary line for this station, press
TAlK/FlASH or pick up the corded handset from
the base; to manually choose a line, press lINE1 /
lINE2 . The phone automatically dials the number
in the first phone number slot.
1.
2.
Dial either number
for an entry
Find the entry you want to dial and press SElECT .
Select one of the two phone numbers for that
entry.
To dial the number with the primary line for this
station, press TAlK/FlASH or pick up the corded
handset from the base; to manually choose a line,
press lINE1 / lINE2 to dial the number.
1.
2.
3.
Use a speed dial
number to open a
phonebook entry
On the dial pad, press and hold the number assigned
to the phonebook entry you want. The phone opens
the phonebook and goes directly to that entry. Follow
the instructions for dialing an entry above.
Close the
phonebook
On the handset, press END ; on the base, press mUTE/
ExIT . (If you open the phonebook during a call, press
BACK to back out without hanging up.)