Uniden DECT4096 Series - Manual (Page 3)

Installing Your Phone
Set Up the Base
Attach the stand
Before you attach the stand, you have to decide if you want the
phone to rest on a desk or hang on a wall.
For desktop use
Turn the stand so the
word Desk is right-
side up (it will be on
the right).
Insert the tabs into
the notches marked
Desk at the top of the
base.
Press in on the latch
and slip it into the notch.
For wall mount use
Turn the stand so the
word WaLL is right-
side up (it will be on
the right).
Insert the tabs into
the notches marked
WaLL at the bottom of
the base.
Press in on the latch
and slip it into the notch.
To remove the stand
Press in on the latches and slide them out of the notch.
Connect the corded handset
Use the coiled cord to connect the
corded handset to the connector
on the left side of the base.
1.
2.
3.
1.
2.
3.
WALL
DESK DESK
DESK
WALL
WALL
DESK DESK
DESK
WALL
WALL
DESK
WALL
WALL
DESK
WALL
DESK
WALL
WALL
DESK