Uniden DECT4096 Series - Manual (Page 19)

menu option: Use it to:
Banner
(Handset only) Change the name used on the handset's
display. Enter any name up to 10 characters.
Handset/Base
Language
Change the language used in the display.
LCD Contrast Change the contrast of the display.
Key Touch Tone Have the keypad sound a tone when you press a key.
The Clock Setup menu
You must set the date and time if you want to use the handset's
alarm feature; setting the clock will also ensure the answering system
stamps your messages with the correct time and day. You can set the
clock from the base or any cordless handset.
Open the menu and select Clock Setup.
Use the numbers on the twelve-key dial pad to enter the date.
Move the cursor to the next line, then use the dial pad to enter the
time.
Press
to switch between AM and PM; when you're finished, press
save .
The Global Setup menu
The settings on this menu are separate for each line: changing the
settings for line 1 will not affect line 2, and vice versa. However, the
settings for each line apply to all stations whenever they use that line.
Before changing these settings, make sure the phone is in standby
and all handsets are within range of the base. (Only one station at a
time can change these settings.)
When you select the Global Setup menu, the phone prompts you to
select Line 1 or Line 2. Then, you can choose one of the following
options to change the global settings for that line:
1.
2.
3.
4.