Uniden DECT4096 Series - Manual (Page 4)

Connect the power and telephone cords
Connect the base AC adapter to the
AC IN 7.8V
jack and route the
cord as shown:
For desktop use For wall mount use
WALL
DESK DESK
DESK
WALL
WALL
DESK
WALL
WALL
DESK
Connect the included two-line telephone cord to the
TEl lINE 1/2
jack. If your phone
company uses a separate
phone jack for each line,
connect a standard
telephone cord to the TeL
LINe 2 jack. Route the cords
as shown above.
Connect the cord from
TEl lINE 1/2
to a two-line phone jack.
OR
If your phone company uses a separate phone jack for each line,
connect the cord from
TEl lINE 1/2
to the jack for line 1; then,
connect the cord from TeL LINe 2 the jack for line 2.
Plug the AC adapter into a standard 120 V AC power outlet.
Place the phone on the wall
On the front of the base,
pull the clip that holds the
corded handset in place
out of its slot.
Rotate the clip 180 degrees.
Flip it from front to back and slide it
back into the slot.
1.
2.
3.
4.
1.
2.
3.
WALL
DESK
AC IN 7.8V TEL LINE 2 TEL LINE 1/2
IF you have a separate
jack for line 2, connect
another phone cord here.
Connect the
telephone cord
here first.
WALL
DESK
AC IN 7.8V TEL LINE 2 TEL LINE 1/2
IF you have a separate
jack for line 2, connect
another phone cord here.
Connect the
telephone cord
here first.