Setting the number of rings, Setting.the.number.of.rings – Uniden DCT738 User Manual
Page 45
44
From the base
From the handset
Press.[menu/clock].six.times.
The.current.setting.(“E”.English,.“F”.French,.
or.“S”.Spanish).appears.on.the.base,.and.it.is.
announced.(“English”.English,.“Français”.French,.
or.“Español”.Spanish).
Press.[
/select].or.[
/select].to.select.the.
language.
Press.[set]
. A confirmation tone sounds, and
the.system.announces.the.new.setting.in.the.
selected.language.
.
2.
3.
4.
Press.[menu/clear]..Select.ANSW..SETUP,.and.
then.the.LANGUAGE.submenu.
Move.the.cursor.to.choose.ENGLISH,.
FRANÇAIS.(French),.or.ESPAÑOL.(Spanish).
Press.[select/
]
. You will hear a confirmation
tone.
.
2.
3.
Setting the Number of Rings
The.ring.time.setting.allows.you.to.set.the.number.of.rings.the.caller.hears.before.your.answering.system.plays.the.
outgoing.message..You.can.set.the.ring.time.to.answer.after.two,.four,.or.six.rings..If.you.enable.the.Toll.Saver.(TS).
setting,.the.answering.system.picks.up.after.two.rings.if.you.have.new.messages,.and.after.four.rings.if.there.are.
none..This.way,.if.you.make.a.long.distance.call.to.check.your.messages,.you.can.hang.up.after.the.second.ring.to.
avoid.long.distance.billing.charges.
From the base
From the handset
Press.[menu/clock].three.times..The.base.
displays.the.current.number.of.rings.(2,.4,.6,.or.
TS.for.toll.saver).and.announces.the.setting.
Press.[
/select].or.[
/select].until.the.
desired.ring.time.appears.
Press.[set]
. A confirmation tone sounds, and the
system.announces.the.new.ring.time..
.
2.
3.
Press.[menu/clear]..Select.the.ANSW..SETUP.
menu,.and.then.the.RING.TIME.submenu.
Move.the.cursor.to.select.a.ring.time.(TOLL.
SAVER,.2.TIMES,.4.TIMES,.or.6.TIMES).
Press.[select/
]
. You will hear a confirmation
tone..
.
2.
3.