Uniden DCT738 - Manual (Page 20)

9
Charging Accessory Handsets
The.handset.is.powered.by.a.rechargeable.battery.pack..The.battery.recharges.automatically.when.the.handset.is.
placed.in.the.charger..
Connect.the.AC.adapter.to.the.DC.IN.9V.jack.and.to.a.20V.
AC.outlet.that.is.not.controlled.by.a.wall.switch.
Caution: Use only the Uniden AD-0005 adapter.
Set.the.charger.on.a.desk.or.tabletop,.and.place.the.handset.
in.the.charger.with.the.keypad.facing.forward.
Make.sure.that.the.charge.LED.illuminates..If.the.LED.does.
not.illuminate,.check.to.see.that.the.AC.adapter.is.plugged.in.
and.the.handset.makes.good.contact.with.the.base.charging.
contacts.
Charge.the.handset.battery.pack.for.at.least.5-20.hours.
before using your new cordless telephone for the first time.
Registering Accessory Handsets
If.you.purchase.an.accessory.handset,.you.need.to.register.the.handset.before.use..Only.one.handset.can.be.
registered.at.a.time..Handsets.supplied.with.the.phone.are.registered.to.the.base.by.the.factory..When.charged,.pre-
registered.handsets.display.a.handset.ID.number..Handsets.that.have.not.been.registered.display.MODELS.VARY!.
CHARGE.HANDSET.ON.THE.BASE.FOR.REGISTRATION.OR.REFER.TO.OWNER’S.MANUAL..(If.an.accessory.
handset.has.ever.been.registered.to.a.base,.you.must.reset.the.handset.before.you.can.register.it.to.a.new.base..
See.Resetting Handsets.on.page.20.).
When.you.register.an.accessory.handset.to.the.base,.the.handset.ID.will.be.assigned.
Note: Before registering any accessory handsets, make sure the accessory handset’s battery is fully
charged.
.
2.
3.
4.