Adjusting the speaker volume, Adjusting the audio tone, Using the clarity boost feature – Uniden DCT738 User Manual

Page 34: Finding a lost handset

Adjusting the Speaker Volume

Handset Speakerphone: You.can.choose.from.six.volume.levels.for.the.handset.speakerphone..To.adjust.the.
speaker.volume.while.on.a.call,.press.[

].(to.make.it.louder).or.[

]..(to.make.it.softer).

Base Speakerphone: You.can.choose.from.ten.volume.levels.for.the.base.speakerphone..To.adjust.the.speaker.
volume.while.on.a.call,.press.[

].(to.make.it.louder).or.[

].(to.make.it.softer).

Adjusting the Audio Tone

If you aren’t satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on
a.call..Your.phone.gives.you.three.audio.tone.options:.low,.natural.and.high;.the.default.setting,.Natural.Tone,.is.
recommended.for.hearing.aid.users..Audio.tone.adjustments.only.apply.to.the.earpiece,.not.the.speakerphone.

To.adjust.the.audio.tone:

With.the.phone.in.talk.mode,.press.[select/

]..to.cycle.through.the.three.audio.tone.options.

When.the.desired.option.appears.on.the.display,.stop..

After.two.seconds,.the.displayed.audio.tone.is.set,.and.the.display.returns.to.normal.

Using the Clarity Boost Feature

If.you.encounter.interference.while.using.your.phone,.you.can.manually.improve.the.sound.by.setting.the.clarity.
booster.to.on..This.works.only.when.the.phone.is.in.use,.so.while.you.are.on.a.call:

Press.[menu/clear].

Move.the.cursor.to.CLARITY.BOOST,.and.then.press.[select/

]..BOOST.ON.and.B.appear.in.the.display.

Use.the.same.procedure.to.turn.off.clarity.booster..BOOST.OFF.appears.

Finding a Lost Handset

To.locate.a.misplaced.handset,.press

[find hs].on.the.base.when.the.phone.is.in.standby..All.registered.handsets.

will.beep.for.60.seconds,.and.PAGING.appears.on.the.handset.display..To.cancel.paging,.press.

[find hs].again.or.

any.key.on.the.found.handset.