Uniden DCT738 - Manual (Page 15)

4
Connecting the Base and Charging the Handset
Connect.the.AC.adapter.to.the.DC.IN.9V.jack.
CAUTION: To avoid risk of fire and shock,
only use the Uniden AD-800 AC adapter.
Connect.the.AC.adapter.to.a.standard.20V.AC.
wall.outlet..DO.NOT.use.an.AC.outlet.controlled.by.
a.wall.switch..
Place.the.handset.in.the.base.with.the.LCD.screen.
facing.forward.
Make.sure.that.the.charge.LED.illuminates..If.the.
LED.does.not.illuminate,.check.to.see.that.the.AC.
adapter.is.plugged.in.and.the.handset.makes.good.
contact.with.the.charging.contacts.
Charge.your.handset.at.least.5.to.20.hours.
before.plugging.into.the.phone.line.
Connecting to the Phone Line
Once.the.battery.pack.is.fully.charged,.connect.the.
telephone.cord.to.the.TEL.LINE.jack.and.to.a.telephone.
jack..
Testing the Connection
Try.making.a.call..If.your.call.does.not.connect.or.you.
cannot.get.a.dial.tone,.try.the.following.steps:
.. Make.sure.the.AC.adapter.cord.is.securely.
connected.to.the.DC.IN.9V.jack.and.a.standard.
power.outlet.
.
2.
3.
4.
5.